• No surprises inside the box:

  • USB docking cable

  • Standard iPhone headphones

  • USB power adapter

  • Oh, what's this? A New Zealand power plug! We've never gotten one of these in a box before!

• Removing the SIM card

• Perhaps the least-touted new feature of the iPhone 3G is the flush headphone jack, allowing non-Apple headphones to be used without an adapter. Yay!

It's open!

• We're working hard on getting it apart. Here's a link to last-year's iPhone disassembly. (Sorry about the dirty fingernails-- we've been waiting in line in cold Auckland for a while.)

• What we're expecting:

  • Apple-labeled Samsung processor

  • Either some kind of GPS chip, or none at all. If there isn't a GPS chip, then it could be built into the processor.

  • Lots of chips with only Apple markings on them. Sometimes we can tell what they are, but most of the time you have to take the chip itself apart first.

• Removing the display!

• Rotating the display up.

• A little birdy has told me that TechOnline will be decapping the chips we can't identify tomorrow, after the US release. They soak the chip in an acid bath to eat away the ceramic coating, then use x-rays and other fancy equipment to examine it.

• The display assembly separated from the unit.

• In a significant departure from the first iPhone, it appears that the LCD and glass covering are separate components-- just like the iPod Touch. They were glued together before, making replacement screens very expensive. The glass breaks more than anything else, so this is great news for repairing the iPhone 3G!

• We had to remove 6 Phillips #00 screws to separate the glass from the LCD.

• The glass (with integrated touch sensors and chips) is underneath, while the LCD is being removed.

• In the previous iPhone, the display was fairly monolithic. A number of components were connected together via the display assembly-- now the display just connects to the main board.

• Behold, the iPhone! Can you see the 3G bits inside?

• The two boards (logic and communications) are now one. Rather than stacking them, as in the last model, they laid it out along the entire length. We're guessing this allowed them to make the battery longer.

• We're not used to taking photos outside our studio, but these pictures are turning out great because of our awesome friends in NZ.

• Props to Andrei Smirnov of Mac Solutions for helping us out. They are a Macintosh sales and support company established in 1998 and based on the North Shore, Auckland. Do us a favor and use his services the next time you're in Auckland!

Do not remove

• Uh oh.

• Let's try removing that.

• And the iPhone explodes!

• Just kidding. Look, the battery isn't soldered on!

• Apple actually listens to us! Or something.

• Dock and headphone connector.

• Once we get the phone completely apart, we'll start posting chip numbers. We'd love help identifying chips from all of you, send us any inside information to iphone3g@ifixit.com. We'll keep it anonymous.

Logic Board

• This is where we get excited. We'll be doing our best to identify each of these chips.

• Remember, you can click on the image to zoom.

• Intel NOR flash in the middle left of the shot

• Skyworks power management SKY77340 (Power Amplifier Module Quad) on the top right: Octopart datasheet

• The chip in the top middle is SMP 3i, Infineon SMARTi Power 3i. From Infineon: the part is "optimized to support modem and data card applications based upon X-GOLD208 and X-GOLD 608, with features ranging from EDGE up to 3G and HSDPA."

• The entire board (the EMI shield is removed from the right side).

• The previous shot is the top right portion of this picture.

• Removing the EMI shielding is tricky, so we're taking our time.

• If you'd like to comment publicly, use the Gizmodo forums or reply via twitter to ifixitlive, and Summize will pull it up.

• The other half of the board. Note the Apple-branded ARM on the left and the SIM card holder at bottom center.

• Big news: Samsung memory markers on the processor again. Looks like they win on the processor front again (not that we were expecting anything different).

  • Markers: 339S0036 ARM K4X16163PC-DGC3 EMC567DB 819 8900B N182F0A3 0825

  • Samsung memory on the chip is slightly different from the first iPhone, which was K4X1G153PC: Octopart datasheet

• The rear panel remains. Looks like that leaked shot was reasonably accurate.

• The battery. Put your soldering irons away, they won't be needed!

• The recycle marker on the battery is blacked out with a sharpie. Suspicious...